Showing 1–16 of 56 results
- Full module – Gas heated
- 4 burner / 2 Ø 100 mm – 2 Ø 130 mm
- Device body is made from 18/8 Cr-Nİ stainless steel stone plate, other internal parts are made from aluminum plate.
- It works with LPG or natural gas and it can be transformed without modification (just injector change)
- There is a gas cock with flame safety screw (if flame is out, gas is automatically cut out)
- Ovens can be controlled separately at different location.
- The enameled oven is suitable for heavy duty.
- Oven cover is stainless steel double wall and isolated.
- Between 50-300°C temperature control is available, bottom and top heaters can be separately controlled
- 1 ½ module / Full module oven– Gas heated.
- 6 burner / 3 Ø 100 mm – 3 Ø 130 mm.
- Device body is made from 18/8 Cr-Nİ stainless steel stone plate, other internal parts are made from aluminum plate.
- It works with LPG or natural gas and it can be transformed without modification (just injector change)
- There is a gas tap with flame safety system (if flame is out, gas is automatically cut out)
- Ovens can be controlled separately at different location.
- The enameled oven is suitable for heavy duty.
- 35/40 kg / m 3 Eco Friendly HCFC Free Polyurethane Insulation
- Touch Control Panel
- Modular, Easy Installation Body
- Led Lighting in Each Door and Drawer
- Stainless Top Table
- Mono-block Detachable Cooling Group
- Cleanable and Detachable Dirt
- Free Gasket CFC Free Cooling Gas: R134 / R404 A
- Internal Depth: 43 cm / 53 cm (GN 1/1 Capacity)
- 35/40 Kg / m 3 Eco Friendly HCFC Free Polyurethane Insulation
- Digital Control Panel
- Bus Bar Lock System
- Custom Beer Dropper
- Beer Tower Insertion Option
- 30 × 50 Sink
Boiling pots (GAS)
- Ability to work with LPG and Ng.
- Magnet safety thermocouple and thermostat.
- Overpressure valve and manometer.
- Cold, hot water filling tap.
- Evacuation faucet.
- Counterweight cover.
- Double-skinned jacket.
- Easy to clean and hygienic.
- Stainless steel body.
Boiling pots (ELECTRIC)
- Overpressure valve and manometer.
- Cold, hot water filling tap.
- Evacuation faucet.
- Counterweight cover.
- Double-skinned jacket.
- Easy to clean and hygienic.
- Stainless steel body.
- It cuts the bread in all sizes into the slices of equal thickness.
- Work sites and blades are manufactured from durable stainless sheet.
- Complies with health conditions.
- Automatic shut-off at the end of the slicing process.
- Thanks to its wheels it can be moved easily.
- Elegant and aesthetic appearance.
- It has 5 mm thick reinforced body and stainless steel top cover.
- It has capped bearings which don’t require lubrication and maintenance.
- It operates silently and without vibration.
Display unit-cooled
- 220V / 50Hz electrical power.
- Operating range 0 ° C + 12 ° C
- R-134 A refrigerant.
- Led lighting.
- Double glazing.
- 2 adjustable shelves.
- Digital temperature control.
Display unit-heating
- 220 V – 50Hz. Energy.
- Led lighting.
- Adjustable heat control.
- 3 adjustable shelves.
- 60″ long x 24″ front to back depth
- Perforated bottom
- 18″ deep heavy gauge bin
- Custom sizes available
- 5″ deeper front to back to match units with single speedrail
- Case capacity: 15 cases
- 1″ drain
- Optional stainless-steel dividers
Technical Data
- Dimensions (mm-inch)
- L: 212 — 8 6/16”
- P: 290 — 11 7/16”
- H: 585 — 23 1/16”
- Sylos (kg): 1,6
- Weight Net-Gros (Kg-Lb): 22,5 (50) – 24,5 (55)
- Burrs (mm): 65
- Voltage (Volt): 110/220V
- Power (Watt): 500/400
Conveyor Dishwasher with Drying Unit
- Drying tunnel: Standard.
- Two speed conveyor belts.
- Two washing engines.
- 27 KW boiler power.
- 9 KW tank power.
- 9 KW drying unit motor power.
- Motor power for machines without pre-wash; 0.35 Kw 2800 D / Min x 2
- Motor power for pre-wash machines; 0.35 Kw 2800 D / Min x 3
- 50 Kw 380 V total power of the machine.
- Full and automatic washing takes place at 55 ° C and hot water rinsing takes place at 80 ° -85 ° C.
- 24 volt control current provides safety during use.
- Magnetic door safety sensor.
- Stainless steel resistors.
- Stainless steel body.
- Full module – Electrical
- Device body is made from 18/8 Cr-Nİ stainless steel stone plate.
- Baskets are made from frying wire, they are covered with tin which is suitable for health standards and handle is protected for heating.
- There is a digital control board for adjust cooking programs.
- There is oil evacuation system with safety valve at front panel.
- Temperature control with 100-180°C thermostat is available and there is another safety thermostat.
Dishwashing machines
- 60 °, -90 °, -120 °, -180 ° C seconds program feature. 1000 plates/hour
- 0.55 kw 2800 D / Min motor power.
- 9.5 kw total power of 380V machine.
- 2.8 kw tank heating power.
- 6 kw rinse water boiler power.
- Stainless steel resistance.
- Thermostat control. (Washing temperature 60 °)
- 2.5 lt / time water consumption.
- Magnetic door safety sensor.
- The feature of starting the program when the lid is closed.
- Full and automatic washing when hot at 55 ° C. rinsing with water at 80 ° -85 ° C.
- Stainless steel body. size:696x765x1485mm
- Thermostatic control.
- Stainless steel baskets.
- The mobile heaters provide easy cleaning.
- Safe oil drain with drain pipe.
- Limit thermostat.
- Easy to clean and hygienic.
- Stainless steel body.
- Planetary mixers are manufactured in high quality and they enable bakeries, confectioners and patisserie to obtain perfect dough mix.
- Bowl and mixer arms which contact with the food comply with hygiene standards and they are manufactured from stainless steel.
- Working speed can be adjusted in three different cycles (108, 183, 352 rpm).
- It ensures quiet and fast use without any problems and thanks to its security cover it is secure to use.
- There is a separate start and stop button to stop the machine in case of emergency.
- It has thermal overload protection.
- It complies with CE standards.
- Container lift lever is used for raising and lowering the container as well as for locking.
- Scrambler, mixer and spiral dough hooks are available.
- Capacity: 25 lt.
- Motor power: 500 W (3/4 HP)
- Electric inlet: 380V 3N AC 50 Hz
- Dimensions: 560*550*910 mm.
- Net weight: 100 kg
